Zoll X Series

Zoll X Defibrillator Features

With Zoll X's Real CPR Help and Real BVM help technologies, the odds of saving your patient from Cardiac arrest increase exponentially. The X series can run off rechargeable batteries or an auxiliary power supply. The Color LCD display offers views of waveforms or numerical displays of the ECG, and respiratory readings along with others all at once. The patient's data can be stored in the defibrillators onboard system or can be transferred to a pc via the built-in USB port or by wireless capabilities. The Zoll X Series Can be used on a wide range of patients from neonates to adults.

• Capnography
• Pulse oximetry
• Three invasive pressures
• Two temperature channels
• Non-invasive blood pressure

Zoll X Defibrillator Specifications

Zoll X Series Dimension

• Height with Handle: 10.4 in (26.4 cm)
• Height without the Handle: 8.75 in (22.2 cm)
• Width: 8.9 in (22.6 cm)
• Depth: 7.9 in (20.1 cm)
• Weight without the battery and Paper: 10.6 lbs
• Weight with the battery and paper: 11.7 lbs

Operating

• Temperature: 0to 50°C
• Humidity: 15 to 95% RH (non-condensing)
• Vibration
  • EN ISO 9919 (per IEC 60068-2-64)
  • RTCA/DO-160G (multiple helicopter frequencies)
  • EN 1789 for ambulance
• Shock: IEC 60068-2-27, 100g, 6ms half sine
• Drop:
  • EN 1789, 30” functional drop
  • IEC 60601-1, Tested at 2 meters
• Altitude: -170 M to 4572 M (-557 feet to 15,000 feet)

Temperature and Storage

• Temperature: -30 to 70°C
• Humidity: 15 to 95% RH (non-condensing)
• Atmospheric pressure: 572 mbar to 1034 mbar
• Shock/vibration: MIL STD 810G, Method 514.6, 4.4.2, Procedure II
• Safety Classification: Class 1 and internal power per IEC/EN 60601-1

AC Auxiliary Operating Power

• input
  • 100-240V 50-60 Hz, 2A
  • 100-115V 400 Hz, 2A
• Output: 14.5V 4.15A 80W (peak)

Battery

• Type: Rechargeable Lithium-Ion, 11.1Vdc, 6.6 Ah, 73Wh
• Capacity:
  • At least 6 hours of continuous monitoring of ECG, SpO2, CO2, three Invasive Pressure channels, and 2 channels of Temperature, with NIBP measurements every 15 minutes and 10 200 J shocks (display set to 30%).
  • At least 100 discharges at maximum shock energy (200 joules).
  • At least 3.5 hours pacing, with ECG, SPO2, CO2, three Invasive Pressures, temperature, NIBP every 15 minutes and pacing at 180 ppm, and 140 mA.
  • At least 300 discharges at maximum shock energy (200 joules) with no parameters and 70% brightness.
  • At least 10 discharges at maximum shock setting (200 joules) after a Low Battery indication.
• Battery Indicators: 5 Battery capacity LED indicators, Fault indicator, Recalibration indicator
• Recharge Rate: 100% in 4 hours, when initiated at Low Battery indication.

Monitor / Display

• Size: 6.5 in (16.56 cm) diagonal
• Input: 3-lead, 5-lead, or 12-lead patient cable, paddles, or multifunction electrodes
• Type: Color LCD, 640 x 480 pixels, 800 MCD
• Sweep Speed (user selectable): 25 mm/sec or 50 mm/se
• Lead Selections: Paddles (Pads), I, II, III, AVR, AVL, AVF, V1-6
• Frequency Response (user selectable)
  • 0.67 – 20 Hz Limited mode
  • 0.67 – 40 Hz Monitor mode
  • 0.25 – 40 Hz Filtered diagnostic mode
  • 0.05 – 150 Hz Diagnostic mode

Defibrillator

• Waveform: Rectilinear Biphasic
• Energy Selections: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 30, 50, 70, 85, 100, 120, 150, 200 joules
• Energy Display: Display indicates selected and delivered energy
• Charge Time: Less than 7 seconds with a new, fully charged battery
• Charge Controls: Front panel and on apex paddle
• Pads/Paddles: Hands-free pads and external adult and pediatric paddles. Adult paddles slide off to expose pediatric paddles.
• Synchronized Mode: Synchronizes defibrillator pulse to patient’s R wave. “SYNC” message displayed on monitor and markers shown on both monitor and recorded ECG. Meets Clause 104 of AAMI DF80.

Pacer

• Type: External transcutaneous pacing
• Pacer Rate: 30 to 180 BPM ± 1.5%.
• Output Current: 0 to 140 mA ± 5% or 5 mA (whichever is greater)
• Modes: Demand and Fixed