Physio-Control LIFEPAK 1000 Defibrillator in the USA and Mexico

Description

The Physio-Control LIFEPAK 1000 Defibrillator is an automated, one-push defibrillator that is simplified for immediate first-response during a cardiac incident. This unit includes a carry case, battery, and electrodes.

Warranty: 5 Years.

This device can easily swap between automatic and manual override, whether it's a bystander operating the unit or an ALS-trained professional, giving them control over the settings of the defibrillator. This device is ideal for display in public areas or in emergency response vehicles.

When in use, this defibrillator can record the settings and information for post-event review. And in the event of passing the patient to hospital staff, the LIFEPAK 1000 is versatile where the electrodes can remain with the patient and reconnect to another advanced monitor without adapters.

Physio-Control LIFEPAK 1000 Defibrillator Features

Includes a carry case, battery, and electrodes.
Seamlessly transfers from scene to hospital.
Automated, one-push defibrillation for untrained responders.
Can quickly transfer between manual and automatic modes.

Physio-Control LIFEPAK 1000 Defibrillator Specifications

Physical Characteristics

Height: 3.4 in (8.7 cm).
Width: 9.2 in (23.4 cm).
Depth: 10.9 in (27.7 cm).
Weight: 7.1 lb (3.2 kg) with one set of REDI-PAK electrodes and one nonrechargeable battery.

Defibrillator

Waveform: Biphasic truncated exponential with voltage and duration compensation for patient impedance*.
Energy Sequence: User configurable, 150 joules–360 joules. Default energy output settings are 200, 300, 360 joules. 360 joules for every shock thereafter.
Charge Time: With new, nonrechargeable battery pack; 200 joules in less than 7 seconds (360 joules in less than 12 seconds).
3-Wire (Lead II) Monitoring Capability: (If ECG display option purchased). Requires purchase of 3-wire (Lead II) monitoring cable and LIFE-PATCH® electrodes.
Device Software: Field upgradeable.
Infant/Child Reduced Energy Defibrillation Electrodes: Reduces selected energy by a factor of 4. Intended for use only with children up to 8 years of age or 25 kg (55 lbs).
Safety Classification: Internally powered equipment IEC 60601-1.
Electrical Protection: Input protected against high voltage defibrillator pulses per IEC 60601-1.

*Voltage compensation is limited to the voltage that would result in delivery of 360 joules into 50 ohms.

Device Settings

Modes:
- AED: Provides operating capability for basic users.
- Manual: Provides operating capability for advanced users.
- ECG: Provides ECG display capability with 3-wire ECG cable.
- Setup: Allows user to configure the device.
- Data Transfer: Allows user to transfer patient data.
- Auto Test: Provides daily automatic tests of hardware and software.
Controls: On/Off, Shock, Menu, Two (2) configurable soft keys.
User Defined Options:
- Device ID: Assigns unique identifier to particular device.
- Energy Sequence: User configurable from 150 to 360 joules.
- Flexible Energy: Increases only after a lower energy was unsuccessful.
- Auto Analyze: User can configure device to auto analyze, auto analyze after first shock, or prompt user to push analyze key before each analysis period.
- CPR Time: (Post shock or after no shock advised) – User configurable – 15, 30, 45, 60, 90, 120, 180 seconds.
- Device Date/Time
- Voice Prompt Volume: Allows user to change speaker volume.
- ECG Display: (If option purchased) - Turns display on/off for AED mode.
- Motion Detection: User defined On/Off (default On).
- Service Alert: Audio alarm if the device needs servicing. Configurable on/off.
- Manual Access: (If ECG display option purchased) – Devices configured with an ECG display may be set up to allow user to initiate a charge and shock without analysis.
- cprMAX Technology Settings:
  - Initial CPR: User defined time for CPR after first analysis regardless of analysis decision. Can be set to OFF, 15, 30, 45, 60, 90, 120 and 180 seconds.
  - Pre-shock CPR: Allows for CPR while device is charging. Can be set to OFF, 15, or 30 seconds.
  - Stacked Shocks: (ON/OFF) When Off, allows for provision of CPR after each shock.
  - Pulse Check: (Always, After Every NSA, After Second NSA, Never) Allows device to prompt for a pulse check either after each shock, after every NSA pulse check, or never prompt for a pulse check (default Never).

Display

Size: 4.7 in (120 mm) x 3.5 in (89 mm).
Frequency Response: 0.55 Hz to 21 Hz (-3 dB), nominal.
ECG Option:
- Waveform Sweep Speed: 25 mm/sec for ECG, nominal.
- Waveform Viewing Time: Minimum 4 seconds.
- Waveform Amplitude: 1 cm/mV, nominal.
- Heart Rate: 20 to 300 BPM digital display, Display “---” if heart rate is less than 20 bpm. Heart symbol flashes for each QRS detection.

Environmental

Operating Temperature: 32° to 122°F (0° to 50°C).
Storage Temperature: -22° to 144°F (-30° to 60°C) with battery and electrodes (maximum exposure limited to 7 days).
Atmospheric Pressure: 575 hPa to 1060 hPa (4572 to -382 meters; 15,000 to -1253 feet).
Relative Humidity: 5 to 95% (non-condensing).
Dust/Water Resistance: IP55 with battery and REDI-PAK™ electrodes installed (IEC 60529/EN 60529).
Bump: 15 g, 1000 bumps (IEC 600-68-2-29).
Shock: 40 g peak, 15-23 ms, 45 Hz cross over frequency.
Drop: 1 meter drop on each corner, edge and surface (MIL-STD-810F, 516.5, Procedure IV).
Vibration: Random vibration test – MIL-STD-810F, Method 514.5, Category 20; Ground vehicle 3.15 g rms 1 hour per axis.
EMI:
- Radiated – IEC 60601-2-4, IEC60601-1-2, CISPR 11 Class B Group 1.
- Immunity – IEC 60601-2-4, IEC 60601-1-2; IEC 61000-4-2 (Level 4), IEC 61000-4-3, IEC
  61000-4-6, IEC 61000-4-8.

Event Documentation and Communication

Memory Capacity: Dual patient storage. Minimum 40 minutes ECG for current patient. Summarized data for previous patient.
Report Types: Continuous ECG, summary (critical resuscitation events and associated waveforms), event log report (report of time stamped entries reflecting operator and device activity), test log report (self test activity report).
Capacity: Minimum 100 time stamped event log entries.
Data Review: CODE-STAT™ 6.1 Medical Informatics System, DT Express™ 2.1 Information Management System or higher.
Communications: Infrared wireless transfer to personal computer.

Battery and Readiness Display

Nonrechargeable Battery:
- Type: Lithium Manganese Dioxide (Li/MnO2), 12.0 V, 4.5 Ah
- Capacity: Typically will provide 440 200-joule discharges or 1030 minutes of operating time with a new battery (370 200-joule shocks or 900 minutes of operating time at 0°C (32°F)).
- Weight: 1 lb (0.45 kg).
- Shelf Life: (prior to installation) After the battery is stored for 5 years at 20° to 30°C, the device will provide 48 months of standby life.
- Standby Life: A new battery provides device power for 5 years.
- Low Battery Indicator: At least 30 200-joule shocks or 75 minutes of operating time remain when low battery is first indicated.
Rechargeable Battery:
- Type: Lithium-ion, 11.1 V, 4.8 Ah, 53 Wh.
- Capacity: Typically will provide 261 200-joule discharges or 608 minutes of operating time with a new fully-charged battery (247 200-joule shocks or 576 minutes of operating time at 0°C (32°F)).
- Battery Charging Time: Within 4.5 hours.
- Weight: 0.45 kg (1.0 lb), maximum.
- Standby Life: A new fully-charged battery provides device power for 6 months.
- Low Battery Indicator: At least 30 200-joule shocks or 75 minutes of operating time remain when low battery is first indicated.
Battery Charger:
- Supported Battery: Lithium-ion Rechargeable Battery, 11.1 V, 4.8 Ah, 53 Wh.
- Electrical: External Power Supply - 100-240VAC, 50/60Hz.
- Temperature: Operating: 0°C to 40°C; Storage: -30°C to 70°C.
- Charge Time: Within 4.5 hours.
- Charge: Constant Current/Constant Voltage within temperature limits.
- Length: 270 mm.
- Width: 97 mm.
- Height: 92 mm.
- Weight: 0.5 kg.

Physio-Control LIFEPAK 1000 Defibrillator Configurations

#99425-000023: Graphical Display, Standard Setup.
#99425-000025: ECG Display, Standard Setup.

Physio-Control LIFEPAK 1000 Defibrillator Accessories

The following items are commonly purchased accessories for the LIFEPAK 1000 Defibrillator. Please note that these items are NOT included with purchase of the LIFEPAK 1000. They are sold separately.

#99996-000117: Physio-Control LIFEPAK 1000 Trainer.
#11141-000100: Physio-Control LIFEPAK 1000 LMnO2 Non-Rechargeable Battery.
#11141-000161: Physio-Control LIFEPAK 1000 Replacement Rechargeable Battery.
#11140-000085: Physio-Control LIFEPAK 1000 Battery Charger.
#11425-000007: Physio-Control LIFEPAK 1000 Bag Assembly.
#11260-000023: Physio-Control LIFEPAK 1000 Hard Shell Case.
#11425-000012: Physio-Control LIFEPAK 1000 Replacement Shoulder Strap.
#11111-000016: Physio-Control LIFEPAK 1000 3-Wire ECG Cable.
#11425-000001: Physio-Control LIFEPAK 1000 Accessory Pouch.
#11250-000052: Physio-Control LIFEPAK 1000 Clip-On Training Electrodes.
#26500-002156: Physio-Control LIFEPAK 1000 Quick Reference Instruction Card
#11998-000320: Physio-Control Ambu Res-Cue First Responder Kit - With Disposable CPR Barrier.
#11998-000321: Physio-Control Ambu Res-Cue First Responder Kit - With Reusable CPR Barrier, Valve, and Filter.